Da Inglese a Italiano Tecnico/Meccanico Produzione manifatturiera, industriale

The cleaning procedure is applicable to flammable liquefied gases such as propanes, butanes, pentanes, etc. All flammable gas cylinders must be flared in a hood.
• Examine the sample cylinder to be sure it is in good working order and contains a rupture disc. Determine which side the “dip tube” is on and the general condition of the cylinder.
• Make sure the rupture disc has been replaced within one year.
• Tag and remove the cylinder from service if any negative conditions exist. Document the condition of the cylinder and schedule it for repair or replacement, if required.
• Attach the cylinder to the cleaning manifold. Use a grounding cable or equivalent if T-tape is being used on the threads of the manifold.
• Place the flare attachment fitting to the top of the sample cylinder. Attach the flare tubing to the fitting of the sample cylinders.