Sep 21, 2019 16:45
4 yrs ago
2 viewers *
English term
blank side
English to Polish
Tech/Engineering
Mechanics / Mech Engineering
"and the BLANK SIDE of the piston is 5 sq. inches, how much total force is applied by the piston?"
Proposed translations
(Polish)
4 | powierzchnia robocza tłoka | Crannmer |
3 | powierzchnia denka | Frank Szmulowicz, Ph. D. |
Proposed translations
38 mins
powierzchnia denka
Propozycja.
--------------------------------------------------
Note added at 6 hrs (2019-09-21 23:37:33 GMT)
--------------------------------------------------
A three-way directional control valve is normally used to control the operation of the single-acting piston-type cylinder. To extend the piston rod, fluid under pressure is directed through the port into the cylinder (fig. 10-5). This
pressure acts on the surface area of the blank side of the piston and forces the piston to the right. This action moves the rod to the right, through the end of the cylinder, thus moving the actuated unit in one direction. During this action, the spring is compressed between the rod side of the piston and the end of the cylinder. The length of the stroke depends upon the physical limits within the cylinder and the required movement of the actuated unit.
http://www.modernhydraulics.net/tag/piston-cylinders
--------------------------------------------------
Note added at 6 hrs (2019-09-21 23:37:33 GMT)
--------------------------------------------------
A three-way directional control valve is normally used to control the operation of the single-acting piston-type cylinder. To extend the piston rod, fluid under pressure is directed through the port into the cylinder (fig. 10-5). This
pressure acts on the surface area of the blank side of the piston and forces the piston to the right. This action moves the rod to the right, through the end of the cylinder, thus moving the actuated unit in one direction. During this action, the spring is compressed between the rod side of the piston and the end of the cylinder. The length of the stroke depends upon the physical limits within the cylinder and the required movement of the actuated unit.
http://www.modernhydraulics.net/tag/piston-cylinders
4 hrs
powierzchnia robocza tłoka
Powierzchnia robocza tłoka wynosi [ekwiwalent 5 cali kwadratowych w jednostkach SI].
Denko to część konstrukcyjna tłoka i jako takie ma dwie strony.
--------------------------------------------------
Note added at 20 Stunden (2019-09-22 13:19:04 GMT)
--------------------------------------------------
Średnica tłoka D= 100 mm, średnica tłoczyska d=30 mm. Powierzchnia robocza tłoka (czynna) 0,0071 m²
https://books.google.de/books?id=b5HLLn0pDS0C&pg=PA360&lpg=P...
Model YELA-50/50
Skok tłoka 50 mm
Wysokość minimalna 155 mm
Udźwig 50t
Objętość oleju max 355 cm³
Powierzchnia robocza tłoka 71 cm²
Siła naporu 497 kN
https://podniesto.pl/produkty/hydraulika-silowa/silowniki/ya...
wzór na obliczanie siły wyporu siłownika.
Wzór jest następujący: P=pf P-siła , p-podane ciśnienie kg/cm², f- powierzchnia robocza tłoka w cm², wzór na f dla siłownika jednostronnego działania: f= D²Π/4
https://www.elektroda.pl/rtvforum/topic2233869.html
Denko to część konstrukcyjna tłoka i jako takie ma dwie strony.
--------------------------------------------------
Note added at 20 Stunden (2019-09-22 13:19:04 GMT)
--------------------------------------------------
Średnica tłoka D= 100 mm, średnica tłoczyska d=30 mm. Powierzchnia robocza tłoka (czynna) 0,0071 m²
https://books.google.de/books?id=b5HLLn0pDS0C&pg=PA360&lpg=P...
Model YELA-50/50
Skok tłoka 50 mm
Wysokość minimalna 155 mm
Udźwig 50t
Objętość oleju max 355 cm³
Powierzchnia robocza tłoka 71 cm²
Siła naporu 497 kN
https://podniesto.pl/produkty/hydraulika-silowa/silowniki/ya...
wzór na obliczanie siły wyporu siłownika.
Wzór jest następujący: P=pf P-siła , p-podane ciśnienie kg/cm², f- powierzchnia robocza tłoka w cm², wzór na f dla siłownika jednostronnego działania: f= D²Π/4
https://www.elektroda.pl/rtvforum/topic2233869.html
Discussion