May 17, 2021 00:55
2 yrs ago
9 viewers *
English term

liquid carburising

GBK English to Arabic Tech/Engineering Engineering (general)
Definition from Engineering Dictionary:
A widely used method of case hardening steel that eliminates scaling and the tendency to decarburisation and results in clean components. Sodium cyanide is the common media for this process, usually heated within the range of 900 930oC. It is advisable to pre heat the components in neutral salts to avoid a temperature drop resulting from immersing cold components into the cyanide. After carburising, either single quench hardening or refining and hardening and tempering is carried out.
Example sentences:
As the rate of heating is very fast in liquid carburising, greater economy is achieved, if smaller is the case depth. (Engineering Notes)
The shape and size of components are limited mainly by furnace size and capacity, although pack and liquid carburising may not be suitable for hardening inside small deep holes and recesses. (OpenLearn)
This article describes the uses of the liquid carburizing process carried out in low and high temperature cyanide-containing baths, and details the noncyanide liquid carburizing process which can be accomplished in a bath containing a special grade of carbon. (ASM International)
Change log

May 12, 2021 18:24: changed "Kudoz queue" from "In queue" to "Public"

May 17, 2021 00:55: changed "Stage" from "Preparation" to "Submission"

May 20, 2021 01:56: changed "Stage" from "Submission" to "Selection"

May 27, 2021 01:54:

Jun 16, 2021 01:54:

Jul 16, 2021 01:56:

Proposed translations

+1
2 hrs

كربنة سائلة

Definition from جامعة تشرين:
الكربنة هي عملية إضافة الكربون إلى الفولاذ المنخفض الكربون، أي تشكيل طبقة سطحية غنية بالكربون. وتستعمل الكربنة السائلة عادة لكربنة الأجزاء الصغيرة وبسماكات صغيرة وتجري في حمامات ملحية تحتوي كربونات الصوديوم وكلوريد الصوديوم والسليكون، مع التسخين حتى درجة 850-820 والإبقاء عند هذه الدرجة لمدة تصل إلى ساعة حيث يتشكل أول أكسيد الكربون، والكربون الحر، ويقومان بإشباع سطح هذه الأجزاء بالكربون، و بعد إجراء الكربنة تتم التقسية بإخراج الأجزاء مباشرة من الحمام إلى الماء أو الزيت حسب نوع الفولاذ.
Example sentences:
وتنقسم الكربنة حسب نوع المواد المستخدمة إلى كربنة صلبة وسائلة وغازية (Wikipedia)
ھدف البحث دراسة تأثير عملية النتردة السائلة ثم الكربنة السائلة في مقاومة البلى الالتصاقي لفولاذ كاربون (University of Technology - Iraq)
liquid carburizing الكربنة السائلة فـي هذه الطريقة توضع أجزاء الفولاذ المراد كربنتها في وعاء خاص ثم تغمر في حـوض (ResearchGate)
Peer comment(s):

agree Lamine Boukabour
8 days
شكرا جزيلا
Something went wrong...
3 days 7 hrs

الإشباع السائل لسطح الصلب بالكربون

Definition from engnetglobal:
Liquid carburizing is a process that is usually used for small and medium-sized parts. In the salt bath the carbon to be diffused in the workpiece comes from a molten salt that is a mixture of sodium cyanide (NaCN) and barium chloride (BaCl2).
Example sentences:
الكربنة (بالإنجليزية: Carburizing)‏ أقدم طرق إشباع سطح الصلب بالكربون، وتستعمل للحصول على صلادة عالية ومقاومة للتآكل للطبقة السطحية، مع الاحتفاظ بقلب لين متين لعض الأجزاء كالتروس وبنز المكابس وحدبات الجذع الموزع. وتتوقف نتائج الكربنة على العوامل الآتية : تركيب الصلب. تركيب الوسط المحتوى على الكربون (الوسط المكربن). طريقة القيام بالعملية - درجة حرارة التسخين ومدة إبقاء الجزء عندها. طابع المعاملة الحرارية بعد الكربنة. تصنع الأجزاء التي يتم كربنتها من صلب ذى نسبة كربون منخفضة أو صلب سبائكي. ولما كانت عملية الكربنة تتم عند درجات حرارة أعلى من درجة حرارة تحول البنية الداخلية للسبيكة كاملة إلى أوستنيت أو أوستنيت مع سمنتيت مع إبقاء القطعة لمدة طويلة، فيفضل لتجنب نمو الحبيبات أن تصنع الأجزاء من صلب صغير الحبيبات. وتنقسم الكربنة حسب نوع المواد المستخدمة إلى كربنة صلبة وسائلة وغازية (wikipedia)
Something went wrong...
Term search
  • All of ProZ.com
  • Term search
  • Jobs
  • Forums
  • Multiple search